An APN is the gateway which allows mobile device networks to connect to the internet. The corresponding SIM must be in the device for the APN to populate.



To begin, navigate to your Project, the Policies, then Network Settings:




  • Fill out the General APN Settings as shown below:
    • Name: Enter a friendly name for the APN.
    • MCC: Mobile Country Code
    • APN Type: APN types are usage categories for an APN entry. One APN entry may support multiple APN types, eg, a single APN may service regular internet traffic ('default') as well as MMS-specific connections.
    • APN Protocol: This specifies whether your device should enable IPv4, IPv6 or both.
    • APN: Access Point Name
    • MNC: Mobile Network Code.
    • Authentication Type: Choose the apn's authentication type. Password authentication protocol (PAP), challenge handshake authentication protocol (CHAP) or either.
    • APN Roaming Protocol: This specifies whether your device should enable IPv4, IPv6 or both when roaming.


  • Fill out the MMS Settings as shown below
    • MMSC: The MMS server address.
    • MMS Proxy: The MMS proxy address.
    • MMS Port: The MMS port number.


  • Server: The APN server address.
  • APN Proxy: The APN proxy address.
  • Username: The APN username
  • Password: The APN password


  • Click "Done" then click "save".
  • Clicking "Reset" will bring you back to the first step.