An APN is the gateway which allows mobile device networks to connect to the internet. NOTE: This feature is only supported on Samsung Devices. The corresponding SIM must be in the device for the APN to populate.



Navigate to the APN tab to begin.



  • Fill out the General APN Settings as shown below:
    • Name: Enter a friendly name for the APN.
    • MCC: Mobile Country Code
    • APN Type: APN types are usage categories for an APN entry. One APN entry may support multiple APN types, eg, a single APN may service regular internet traffic ('default') as well as MMS-specific connections.
    • APN Protocol: This specifies whether your device should enable IPv4, IPv6 or both.
    • APN: Access Point Name
    • MNC: Mobile Network Code.
    • Authentication Type: Choose the apn's authentication type. Password authentication protocol (PAP), challenge handshake authentication protocol (CHAP) or either.
    • APN Roaming Protocol: This specifies whether your device should enable IPv4, IPv6 or both when roaming.


  • Fill out the MMS Settings as shown below
    • MMSC: The MMS server address.
    • MMS Proxy: The MMS proxy address.
    • MMS Port: The MMS port number.


  • Server: The APN server address.
  • APN Proxy: The APN proxy address.
  • Username: The APN username
  • Password: The APN password


  • Click "Done" then click "save".
  • Clicking "Reset" will bring you back to the first step.